Two posts ago is a photo of the den before we started the demo. The demo that we were able to do consisted of all the walls. We didn't do the ceiling and will get to that later. We're going to try and not be so cold this time round.
In order to removed the wood paneling, we used a circular saw to cut right across the wall. This made the paneling a lot easier to remove. We found that the paneling was really only attached at the top and bottom, and that there was no drywall behind the paneling. The lack of drywall was nice because that meant that there was less to take to the dump (transfer station).
As you can see in the photos, we found some insulation in the walls! It was foil-backed fiberglass and about one inch thick.
As we were removing the paneling on the south wall of the room, we found a dead mouse. It had been dead for quite some time.
After we pulled the paneling off the west and south walls, we started on the north wall (which will be completely removed and rebuilt eventually). The north wall had 12" square ceiling tiles (painted white) on the surface. Beneath the 12" tiles was a layer of cellulose-based tiles that were about 12" x 24" (painted blue). Beneath the blue tiles was a layer of 3/4" thick sheathing planks.
My brother-in-law's friend came over and helped out with the demo, and his help was definitely appreciated. While I and the friend did demo, my spouse and brother-in-law made three dump runs. Taking the debris to the dump right away paid, off since the garbage didn't have a chance to get rained on and get heavy (the transfer station charges by weight).
The chronicle of the trials, tribulations, and joys of attempting to update a 1930's-era home, affectionately termed "the rat hole" because of its state of disrepair, in Kenmore, Washington.
Saturday, January 31, 2009
Friday, January 30, 2009
Den Update Soon!
You guys are fortunate that I've pretty much already used up all my "den" puns.
Anyway, we'll have pictures and an update up soon. I was doing dump runs all day in my truck, taking away demolition debris, so I wasn't really around and don't have that much to say. Trucking the crap to the dump as it got torn out was an awesome idea. No more piles of garbage in the yard! Anyway, we got all the interior walls torn down to the studs, and imagine our surprise when there was actually insulation in the walls.
This weekend we're going to take out the insulation and the siding and begin the reframing of the wall that's in the carport. That way we can replace the studs that need to be replaced and put sheathing up ASAP so we don't freeze.
Anyway, we'll have pictures and an update up soon. I was doing dump runs all day in my truck, taking away demolition debris, so I wasn't really around and don't have that much to say. Trucking the crap to the dump as it got torn out was an awesome idea. No more piles of garbage in the yard! Anyway, we got all the interior walls torn down to the studs, and imagine our surprise when there was actually insulation in the walls.
This weekend we're going to take out the insulation and the siding and begin the reframing of the wall that's in the carport. That way we can replace the studs that need to be replaced and put sheathing up ASAP so we don't freeze.
Thursday, January 22, 2009
Into the Lion's Den
This weekend we begin our push on the den in earnest. Once we're finished, we'll have a place to put a television and eventually a couch, so when people come over, they'll actually have a place to sit while we visit that doesn't involve scarily rickety second hand dining chairs. It will be so nice to not have to hang out in our bedroom anymore. And don't get me started on the pleasures of having a floor...
However, the den is where we had set up our office, and the other half of the room was used for boxes/storage.
We're getting pretty good at moving stuff from one room to the next. It all got moved into the dining room (the one we just completed). We took all the furniture in the dining room, pushed it up against the walls, and proceeded to fill the entire space with boxes. We moved the desk/computer in there, too. It smells better in the new room, but without the plastic cocoon it's not nearly as warm. Oh well, it won't be as cold as it was a couple of winters ago, and it's already nearly February, so we'll be just fine.
This weekend is slated for demo, which should go pretty easily and quickly. We're going to get rid of the exterior wall first, and then throw up some sheathing just to keep it enclosed. No more open walls in the winter for us, no sir. Then we can work on the other walls, get those framed, and finally do the ceiling. We're hoping this will minimize our exposure to the cold, and especially hoping that this room goes far more quickly and smoothly than the last one.
However, the den is where we had set up our office, and the other half of the room was used for boxes/storage.
We're getting pretty good at moving stuff from one room to the next. It all got moved into the dining room (the one we just completed). We took all the furniture in the dining room, pushed it up against the walls, and proceeded to fill the entire space with boxes. We moved the desk/computer in there, too. It smells better in the new room, but without the plastic cocoon it's not nearly as warm. Oh well, it won't be as cold as it was a couple of winters ago, and it's already nearly February, so we'll be just fine.
This weekend is slated for demo, which should go pretty easily and quickly. We're going to get rid of the exterior wall first, and then throw up some sheathing just to keep it enclosed. No more open walls in the winter for us, no sir. Then we can work on the other walls, get those framed, and finally do the ceiling. We're hoping this will minimize our exposure to the cold, and especially hoping that this room goes far more quickly and smoothly than the last one.
Wednesday, January 21, 2009
Mini-Project 2: Range Hood of Horror
As those of you who helped us clean the kitchen upon moving in will remember, the kitchen was originally covered in grease. Lots of grease. Big meat-eaters, apparently, or just never cleaned anything. The whole kitchen took multiple scrubbings, and still there was grease. Plus the light burned out a year after we moved in-it was a wiring issue because merely changing the bulb didn't help. We never used the fan because it just blew the air (and mystery crungles) right back down onto the stove, which was immensely appetizing.
Well, the kitchen is dark, and without the light it's even darker over where the stove is. That makes it tough to see while you're cooking (as if I ever voluntarily cooked). And although we don't cook meat or generate a lot of grease, we still generate a lot of steam when we cook, which just fills the kitchen and leaves everything damp. Tired of the damp and darkness, we finally decided we'd had enough and tackled the range hood of horror.
The trick to getting the fan to work properly turned out to be cleaning the vent to the outside. It was so caked with sludge that the vent was actually stuck closed. Yum! We had to use lacquer thinner to get the grease off, since we didn't want to replace the fan. Here's all you really need to see.
That's the brush we used to clean. We had to throw the brush away. And this picture was taken after we cleaned off the brush itself a little bit. *shudder* Here's a shot of the filthy open holes.
After some exploratory troubleshooting and some wrong turns, it became evident that the light socket itself had shorted out. Instead of repairing the socket, we just put a new one in (simple is best, sometimes). We also wired it to the fan switch so that both turn on at the same time, since we had cut all the wires to the original light switch and didn't feel like going back and wiring it all up again.
But, at long last, success!
Well, the kitchen is dark, and without the light it's even darker over where the stove is. That makes it tough to see while you're cooking (as if I ever voluntarily cooked). And although we don't cook meat or generate a lot of grease, we still generate a lot of steam when we cook, which just fills the kitchen and leaves everything damp. Tired of the damp and darkness, we finally decided we'd had enough and tackled the range hood of horror.
The trick to getting the fan to work properly turned out to be cleaning the vent to the outside. It was so caked with sludge that the vent was actually stuck closed. Yum! We had to use lacquer thinner to get the grease off, since we didn't want to replace the fan. Here's all you really need to see.
That's the brush we used to clean. We had to throw the brush away. And this picture was taken after we cleaned off the brush itself a little bit. *shudder* Here's a shot of the filthy open holes.
After some exploratory troubleshooting and some wrong turns, it became evident that the light socket itself had shorted out. Instead of repairing the socket, we just put a new one in (simple is best, sometimes). We also wired it to the fan switch so that both turn on at the same time, since we had cut all the wires to the original light switch and didn't feel like going back and wiring it all up again.
But, at long last, success!
Tuesday, January 20, 2009
Mini-Project 1: Finished Cabinet
We were talking about this blog the other day, and we realized that we never posted photos of the finished storage cabinet we built in the carport. Yeah, I'm sure everyone was dying to see the photos. But here they are anyway.
The cabinet has been working well for us; it'll work even better when we put the door in the den leading to the carport. The cabinet locks up nice and tight...especially when the keys were inside. We went nuts looking for those keys, and finally had to cut the locks off with a Dremel (we used security screws, so we couldn't just unscrew the hinges). Took a few minutes, but we got inside. And there were the keys. We'll try not to make that mistake again.
We also got all the window trim painted - I know we posted some pics of the whole room, but I'm so pleased with the way the windows look that here are some photos taken in October of the painted windows. Imagine how nice they look even without the blue tape. ^_^
Next time: the range hood of horror.
The cabinet has been working well for us; it'll work even better when we put the door in the den leading to the carport. The cabinet locks up nice and tight...especially when the keys were inside. We went nuts looking for those keys, and finally had to cut the locks off with a Dremel (we used security screws, so we couldn't just unscrew the hinges). Took a few minutes, but we got inside. And there were the keys. We'll try not to make that mistake again.
We also got all the window trim painted - I know we posted some pics of the whole room, but I'm so pleased with the way the windows look that here are some photos taken in October of the painted windows. Imagine how nice they look even without the blue tape. ^_^
Next time: the range hood of horror.
Monday, January 19, 2009
We're Back!
After a very nice holiday season, we're getting ready for round 2, the den. More on that in a bit.
Even though we haven't been working on actual rooms, however, we've still been plugging away at a few things that have been bothering us.
For one, there's really not a lot of storage in this house. The master bedroom has big closets, and the other bedroom has a closet as well, but no linen closet for towels/sheets/sleeping bags, etc. So, we've been using bookshelves in our bedroom, but shelves take up space in the room that we're going to need come June.
It was my spouse's idea to use the shower in the master bath as a closet. From nightmare shower to heavenly storage! The shower is way too dark and small, and always looks moldy and filthy no matter how much you scrub it, hence its disuse. Some Tyvek and quick shelving later and presto! Excellent temporary linen closet (we'll be putting a real linen close in during our next phase of construction).
I'll talk about some of our other mini-projects over the course of the week, and then hopefully next week we'll have some good demolition pictures. The plan is to submit for the permit next Tuesday (since there's plumbing and more electrical involved, we want the permit for insurance purposes), and hopefully have it completed by June. Since the exterior wall is in the carport this time we won't need to do fancy siding or anything. We will be putting in a door, and a media closet, along with all the laundry/linen closets accessible from the hallway. Ahhh, sweet storage. And then once that's all done, we can finally put in a floor. I think that makes me most excited of all.
Even though we haven't been working on actual rooms, however, we've still been plugging away at a few things that have been bothering us.
For one, there's really not a lot of storage in this house. The master bedroom has big closets, and the other bedroom has a closet as well, but no linen closet for towels/sheets/sleeping bags, etc. So, we've been using bookshelves in our bedroom, but shelves take up space in the room that we're going to need come June.
It was my spouse's idea to use the shower in the master bath as a closet. From nightmare shower to heavenly storage! The shower is way too dark and small, and always looks moldy and filthy no matter how much you scrub it, hence its disuse. Some Tyvek and quick shelving later and presto! Excellent temporary linen closet (we'll be putting a real linen close in during our next phase of construction).
I'll talk about some of our other mini-projects over the course of the week, and then hopefully next week we'll have some good demolition pictures. The plan is to submit for the permit next Tuesday (since there's plumbing and more electrical involved, we want the permit for insurance purposes), and hopefully have it completed by June. Since the exterior wall is in the carport this time we won't need to do fancy siding or anything. We will be putting in a door, and a media closet, along with all the laundry/linen closets accessible from the hallway. Ahhh, sweet storage. And then once that's all done, we can finally put in a floor. I think that makes me most excited of all.
Subscribe to:
Posts (Atom)