We've been raking the rocks out of the soil that the sewer contractors graded their work area with. There are a lot of rocks! We're mostly trying to get rid of the ones that are the size of a quarter or bigger. Especially the rocks in the lawn area. The work is going well enough. We try do do it whenever time permits. The only thing we're up against is the weeds and grass that are starting to grow back. Getting the rocks out of the way before the plants come back would definitely be nice.
The chronicle of the trials, tribulations, and joys of attempting to update a 1930's-era home, affectionately termed "the rat hole" because of its state of disrepair, in Kenmore, Washington.
Sunday, September 26, 2010
Wednesday, September 15, 2010
Sewer Connection
We're connected to the sewer! The work took place at the end of August but we're just now getting around to posting about it.
The weekend before the sewer connection required us to do a little preparation work. We had to reroute the kitchen sink into the washer drain line. This required being under the house which we all know is wonderful. We also had to cut out a section of the deck to expose the old washer drain pipe and to dig part of the trench.
The last thing that we had to do was limb up the cedars so that the construction equipment had room to maneuver.
We've posted the photos to a Picasa album.
Everything works and we've paid the contractor and the city. This was not a cheap project. If we had been more savvy, we'd have had the side sewer connection run under the front lot when the front house was being build. It probably would have cost less. But it would have meant dealing with the horrible developer.
The contractor (Bolles Construction) was fabulous. They were very professional and left the site in very good condition. They even dumped the left over crushed gravel at the end of the driveway thus filling in the muddy holes that have been there since we bought our house. We are very appreciative!
The weekend before the sewer connection required us to do a little preparation work. We had to reroute the kitchen sink into the washer drain line. This required being under the house which we all know is wonderful. We also had to cut out a section of the deck to expose the old washer drain pipe and to dig part of the trench.
The last thing that we had to do was limb up the cedars so that the construction equipment had room to maneuver.
We've posted the photos to a Picasa album.
2010-08 Sewer Connection |
Everything works and we've paid the contractor and the city. This was not a cheap project. If we had been more savvy, we'd have had the side sewer connection run under the front lot when the front house was being build. It probably would have cost less. But it would have meant dealing with the horrible developer.
The contractor (Bolles Construction) was fabulous. They were very professional and left the site in very good condition. They even dumped the left over crushed gravel at the end of the driveway thus filling in the muddy holes that have been there since we bought our house. We are very appreciative!
Wednesday, September 08, 2010
Hearth
We've finally gotten around to the hearth. There are a couple of stone shops that are close to us and one of them has remnants. We've been by a couple of times but never saw a piece of stone we loved (we've been hoping to fine a piece of soapstone).
Well, we dropped by again and they had a remnant that was the perfect size in Dark Julia (some variety of soapstone). The shop next door that sells entire slabs had a sample so we were able to borrow it and bring it home to see how it looked. It looked good in front of the fireplace (with with and without the baby on it).
We emailed the shop drawings of what we wanted and also gave them a deposit. The hearth was ready a week later. It barely fit in the back of the Subaru. The shop had recommended that it travel on end (like glass) so as to reduce the chance of fracture. It weighed about 100 pounds.
Soapstone needs to be oiled with mineral oil (a lot) for it to get dark. Here's a look at the first coat. We'll be putting on many more coats (even after it's installed).
We prepped the area and placed the hearth. We used silicone as the adhesive on advice from the stone shop. We'd cut a bunch of shims to support the hearth, but it didn't lay flat (the floor's not really flat enough). We ended up only using a few.
We love the look of the hearth. So does the baby. He'll love the cool stone on those hot summer days next year.
Well, we dropped by again and they had a remnant that was the perfect size in Dark Julia (some variety of soapstone). The shop next door that sells entire slabs had a sample so we were able to borrow it and bring it home to see how it looked. It looked good in front of the fireplace (with with and without the baby on it).
We emailed the shop drawings of what we wanted and also gave them a deposit. The hearth was ready a week later. It barely fit in the back of the Subaru. The shop had recommended that it travel on end (like glass) so as to reduce the chance of fracture. It weighed about 100 pounds.
Soapstone needs to be oiled with mineral oil (a lot) for it to get dark. Here's a look at the first coat. We'll be putting on many more coats (even after it's installed).
We prepped the area and placed the hearth. We used silicone as the adhesive on advice from the stone shop. We'd cut a bunch of shims to support the hearth, but it didn't lay flat (the floor's not really flat enough). We ended up only using a few.
We love the look of the hearth. So does the baby. He'll love the cool stone on those hot summer days next year.
Subscribe to:
Posts (Atom)